Load Tray 2 or optional Tray 3
1.
Pull the tray out of the product.
ENWW
Load paper trays
81
2.
Slide open the paper length and width guides.
3.
To load Legal-size paper, extend the tray by
pressing and holding the extension tab while
pulling the front of the tray toward you.
NOTE:
When it is loaded with Legal-size
paper, the tray extends from the front of the
product approximately 64 mm (2.5 inches).
4.
Place the paper in the tray and make sure
that it is flat at all four corners. Slide the side
paper width guides so that they align with the
paper-size marking in the bottom of the tray.
Slide the front paper length guide so that it
pushes the stack of paper against the back of
the tray.
82
Chapter 6 Paper and print media
ENWW
5.
Push down on the paper to make sure that
the paper stack is below the paper limit tabs
on the side of the tray.
6.
Slide the tray into the product.